Categories
android android-bitmap bitmap image out-of-memory

Strange OutOfMemory issue while loading an image to a Bitmap object

1375

I have a ListView with a couple of image buttons on each row. When the user clicks the list row, it launches a new activity. I have had to build my own tabs because of an issue with the camera layout. The activity that gets launched for the result is a map. If I click on my button to launch the image preview (load an image off the SD card) the application returns from the activity back to the ListView activity to the result handler to relaunch my new activity which is nothing more than an image widget.

The image preview on the ListView is being done with the cursor and ListAdapter. This makes it pretty simple, but I am not sure how I can put a resized image (I.e. Smaller bit size not pixel as the src for the image button on the fly. So I just resized the image that came off the phone camera.

The issue is that I get an OutOfMemoryError when it tries to go back and re-launch the 2nd activity.

  • Is there a way I can build the list adapter easily row by row, where I can resize on the fly (bitwise)?

This would be preferable as I also need to make some changes to the properties of the widgets/elements in each row as I am unable to select a row with the touch screen because of the focus issue. (I can use rollerball.)

  • I know I can do an out of band resize and save my image, but that is not really what I want to do, but some sample code for that would be nice.

As soon as I disabled the image on the ListView it worked fine again.

FYI: This is how I was doing it:

String[] from = new String[] { DBHelper.KEY_BUSINESSNAME, DBHelper.KEY_ADDRESS,
    DBHelper.KEY_CITY, DBHelper.KEY_GPSLONG, DBHelper.KEY_GPSLAT,
    DBHelper.KEY_IMAGEFILENAME  + ""};
int[] to = new int[] { R.id.businessname, R.id.address, R.id.city, R.id.gpslong,
    R.id.gpslat, R.id.imagefilename };
notes = new SimpleCursorAdapter(this, R.layout.notes_row, c, from, to);
setListAdapter(notes);

Where R.id.imagefilename is a ButtonImage.

Here is my LogCat:

01-25 05:05:49.877: ERROR/dalvikvm-heap(3896): 6291456-byte external allocation too large for this process.
01-25 05:05:49.877: ERROR/(3896): VM wont let us allocate 6291456 bytes
01-25 05:05:49.877: ERROR/AndroidRuntime(3896): Uncaught handler: thread main exiting due to uncaught exception
01-25 05:05:49.917: ERROR/AndroidRuntime(3896): java.lang.OutOfMemoryError: bitmap size exceeds VM budget
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.graphics.BitmapFactory.nativeDecodeStream(Native Method)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.graphics.BitmapFactory.decodeStream(BitmapFactory.java:304)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.graphics.BitmapFactory.decodeFile(BitmapFactory.java:149)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.graphics.BitmapFactory.decodeFile(BitmapFactory.java:174)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.graphics.drawable.Drawable.createFromPath(Drawable.java:729)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.ImageView.resolveUri(ImageView.java:484)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.ImageView.setImageURI(ImageView.java:281)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.SimpleCursorAdapter.setViewImage(SimpleCursorAdapter.java:183)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.SimpleCursorAdapter.bindView(SimpleCursorAdapter.java:129)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.CursorAdapter.getView(CursorAdapter.java:150)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.AbsListView.obtainView(AbsListView.java:1057)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.ListView.makeAndAddView(ListView.java:1616)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.ListView.fillSpecific(ListView.java:1177)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.ListView.layoutChildren(ListView.java:1454)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.AbsListView.onLayout(AbsListView.java:937)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.view.View.layout(View.java:5611)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.LinearLayout.setChildFrame(LinearLayout.java:1119)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.LinearLayout.layoutHorizontal(LinearLayout.java:1108)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.LinearLayout.onLayout(LinearLayout.java:922)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.view.View.layout(View.java:5611)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.FrameLayout.onLayout(FrameLayout.java:294)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.view.View.layout(View.java:5611)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.LinearLayout.setChildFrame(LinearLayout.java:1119)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.LinearLayout.layoutVertical(LinearLayout.java:999)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.LinearLayout.onLayout(LinearLayout.java:920)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.view.View.layout(View.java:5611)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.widget.FrameLayout.onLayout(FrameLayout.java:294)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.view.View.layout(View.java:5611)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.view.ViewRoot.performTraversals(ViewRoot.java:771)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.view.ViewRoot.handleMessage(ViewRoot.java:1103)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.os.Handler.dispatchMessage(Handler.java:88)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.os.Looper.loop(Looper.java:123)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at android.app.ActivityThread.main(ActivityThread.java:3742)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at java.lang.reflect.Method.invokeNative(Native Method)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at java.lang.reflect.Method.invoke(Method.java:515)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:739)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:497)
01-25 05:05:49.917: ERROR/AndroidRuntime(3896):     at dalvik.system.NativeStart.main(Native Method)
01-25 05:10:01.127: ERROR/AndroidRuntime(3943): ERROR: thread attach failed 

I also have a new error when displaying an image:

22:13:18.594: DEBUG/skia(4204): xxxxxxxxxxx jpeg error 20 Improper call to JPEG library in state %d
22:13:18.604: INFO/System.out(4204): resolveUri failed on bad bitmap uri: 
22:13:18.694: ERROR/dalvikvm-heap(4204): 6291456-byte external allocation too large for this process.
22:13:18.694: ERROR/(4204): VM won't let us allocate 6291456 bytes
22:13:18.694: DEBUG/skia(4204): xxxxxxxxxxxxxxxxxxxx allocPixelRef failed

8

  • 9

    I solved this by avoiding Bitmap.decodeStream or decodeFile and using BitmapFactory.decodeFileDescriptor method.

    – Fraggle

    Aug 19, 2011 at 1:56

  • 2

    I Also faced similar issue couple of weeks back and i solved it by scaling down images upto optimal point. I have written complete approach in my blog codingjunkiesforum.wordpress.com/2014/06/12/… and uploaded complete sample project with OOM prone code vs OOM Proof code athttps://github.com/shailendra123/BitmapHandlingDemo

    Jun 12, 2014 at 10:53

  • 2

    Full solution .. stackoverflow.com/a/24135283/294884

    – Fattie

    Jul 29, 2014 at 11:29

  • 6

    The accepted answer on this question is being discussed on meta

    – rene

    Sep 7, 2015 at 8:44

  • 5

    This happens because of bad android architecture. It should resize images itself like ios and UWP does this. I don’t have to do this stuff myself. Android developers get used to that hell and think it works the way it should.

    Mar 14, 2018 at 11:13


684

The Android Training class, “Displaying Bitmaps Efficiently“, offers some great information for understanding and dealing with the exception `java.lang.OutOfMemoryError: bitmap size exceeds VM budget when loading Bitmaps.


Read Bitmap Dimensions and Type

The BitmapFactory class provides several decoding methods (decodeByteArray(), decodeFile(), decodeResource(), etc.) for creating a Bitmap from various sources. Choose the most appropriate decode method based on your image data source. These methods attempt to allocate memory for the constructed bitmap and therefore can easily result in an OutOfMemory exception. Each type of decode method has additional signatures that let you specify decoding options via the BitmapFactory.Options class. Setting the inJustDecodeBounds property to true while decoding avoids memory allocation, returning null for the bitmap object but setting outWidth, outHeight and outMimeType. This technique allows you to read the dimensions and type of the image data prior to the construction (and memory allocation) of the bitmap.

BitmapFactory.Options options = new BitmapFactory.Options();
options.inJustDecodeBounds = true;
BitmapFactory.decodeResource(getResources(), R.id.myimage, options);
int imageHeight = options.outHeight;
int imageWidth = options.outWidth;
String imageType = options.outMimeType;

To avoid java.lang.OutOfMemory exceptions, check the dimensions of a bitmap before decoding it unless you absolutely trust the source to provide you with predictably sized image data that comfortably fits within the available memory.


Load a scaled-down version into Memory

Now that the image dimensions are known, they can be used to decide if the full image should be loaded into memory or if a subsampled version should be loaded instead. Here are some factors to consider:

  • Estimated memory usage of loading the full image in memory.
  • The amount of memory you are willing to commit to loading this image given any other memory requirements of your application.
  • Dimensions of the target ImageView or UI component that the image is to be loaded into.
  • Screen size and density of the current device.

For example, it’s not worth loading a 1024×768 pixel image into memory if it will eventually be displayed in a 128×96 pixel thumbnail in an ImageView.

To tell the decoder to subsample the image, loading a smaller version into memory, set inSampleSize to true in your BitmapFactory.Options object. For example, an image with resolution 2048×1536 that is decoded with an inSampleSize of 4 produces a bitmap of approximately 512×384. Loading this into memory uses 0.75MB rather than 12MB for the full image (assuming a bitmap configuration of ARGB_8888). Here’s a method to calculate a sample size value that is a power of two based on a target width and height:

public static int calculateInSampleSize(
        BitmapFactory.Options options, int reqWidth, int reqHeight) {
    // Raw height and width of image
    final int height = options.outHeight;
    final int width = options.outWidth;
    int inSampleSize = 1;

    if (height > reqHeight || width > reqWidth) {

        final int halfHeight = height / 2;
        final int halfWidth = width / 2;

        // Calculate the largest inSampleSize value that is a power of 2 and keeps both
        // height and width larger than the requested height and width.
        while ((halfHeight / inSampleSize) > reqHeight
                && (halfWidth / inSampleSize) > reqWidth) {
            inSampleSize *= 2;
        }
    }

    return inSampleSize;
}

Note: A power of two value is calculated because the decoder uses a
final value by rounding down to the nearest power of two, as per the
inSampleSize documentation.

To use this method, first decode with inJustDecodeBounds set to true, pass the options through and then decode again using the new inSampleSizevalue andinJustDecodeBoundsset tofalse`:

public static Bitmap decodeSampledBitmapFromResource(Resources res, int resId,
    int reqWidth, int reqHeight) {

    // First decode with inJustDecodeBounds=true to check dimensions
    final BitmapFactory.Options options = new BitmapFactory.Options();
    options.inJustDecodeBounds = true;
    BitmapFactory.decodeResource(res, resId, options);

    // Calculate inSampleSize
    options.inSampleSize = calculateInSampleSize(options, reqWidth, reqHeight);

    // Decode bitmap with inSampleSize set
    options.inJustDecodeBounds = false;
    return BitmapFactory.decodeResource(res, resId, options);
}

This method makes it easy to load a bitmap of arbitrarily large size into an ImageView that displays a 100×100 pixel thumbnail, as shown in the following example code:

mImageView.setImageBitmap(
    decodeSampledBitmapFromResource(getResources(), R.id.myimage, 100, 100));

You can follow a similar process to decode bitmaps from other sources, by substituting the appropriate BitmapFactory.decode* method as needed.

4

  • 24

    This answer is being discussed on meta

    – rene

    Sep 7, 2015 at 8:44

  • 10

    This answer (except the information reached through the link) do not offer much of a solution as for an answer. The important parts of the link should be merged into the question.

    Sep 7, 2015 at 10:02


  • 8

    This answer, like the question and the other answers are Community Wiki, so this is something the community can fix by editing, something that does not require moderator intervention.

    – Martijn Pieters

    Sep 8, 2015 at 18:44

  • Really helpful in 2022.. Trying to run an app on an old HTC One S. 31mb image in a memory stream is too much lol.

    Jun 22 at 4:57

684

The Android Training class, “Displaying Bitmaps Efficiently“, offers some great information for understanding and dealing with the exception `java.lang.OutOfMemoryError: bitmap size exceeds VM budget when loading Bitmaps.


Read Bitmap Dimensions and Type

The BitmapFactory class provides several decoding methods (decodeByteArray(), decodeFile(), decodeResource(), etc.) for creating a Bitmap from various sources. Choose the most appropriate decode method based on your image data source. These methods attempt to allocate memory for the constructed bitmap and therefore can easily result in an OutOfMemory exception. Each type of decode method has additional signatures that let you specify decoding options via the BitmapFactory.Options class. Setting the inJustDecodeBounds property to true while decoding avoids memory allocation, returning null for the bitmap object but setting outWidth, outHeight and outMimeType. This technique allows you to read the dimensions and type of the image data prior to the construction (and memory allocation) of the bitmap.

BitmapFactory.Options options = new BitmapFactory.Options();
options.inJustDecodeBounds = true;
BitmapFactory.decodeResource(getResources(), R.id.myimage, options);
int imageHeight = options.outHeight;
int imageWidth = options.outWidth;
String imageType = options.outMimeType;

To avoid java.lang.OutOfMemory exceptions, check the dimensions of a bitmap before decoding it unless you absolutely trust the source to provide you with predictably sized image data that comfortably fits within the available memory.


Load a scaled-down version into Memory

Now that the image dimensions are known, they can be used to decide if the full image should be loaded into memory or if a subsampled version should be loaded instead. Here are some factors to consider:

  • Estimated memory usage of loading the full image in memory.
  • The amount of memory you are willing to commit to loading this image given any other memory requirements of your application.
  • Dimensions of the target ImageView or UI component that the image is to be loaded into.
  • Screen size and density of the current device.

For example, it’s not worth loading a 1024×768 pixel image into memory if it will eventually be displayed in a 128×96 pixel thumbnail in an ImageView.

To tell the decoder to subsample the image, loading a smaller version into memory, set inSampleSize to true in your BitmapFactory.Options object. For example, an image with resolution 2048×1536 that is decoded with an inSampleSize of 4 produces a bitmap of approximately 512×384. Loading this into memory uses 0.75MB rather than 12MB for the full image (assuming a bitmap configuration of ARGB_8888). Here’s a method to calculate a sample size value that is a power of two based on a target width and height:

public static int calculateInSampleSize(
        BitmapFactory.Options options, int reqWidth, int reqHeight) {
    // Raw height and width of image
    final int height = options.outHeight;
    final int width = options.outWidth;
    int inSampleSize = 1;

    if (height > reqHeight || width > reqWidth) {

        final int halfHeight = height / 2;
        final int halfWidth = width / 2;

        // Calculate the largest inSampleSize value that is a power of 2 and keeps both
        // height and width larger than the requested height and width.
        while ((halfHeight / inSampleSize) > reqHeight
                && (halfWidth / inSampleSize) > reqWidth) {
            inSampleSize *= 2;
        }
    }

    return inSampleSize;
}

Note: A power of two value is calculated because the decoder uses a
final value by rounding down to the nearest power of two, as per the
inSampleSize documentation.

To use this method, first decode with inJustDecodeBounds set to true, pass the options through and then decode again using the new inSampleSizevalue andinJustDecodeBoundsset tofalse`:

public static Bitmap decodeSampledBitmapFromResource(Resources res, int resId,
    int reqWidth, int reqHeight) {

    // First decode with inJustDecodeBounds=true to check dimensions
    final BitmapFactory.Options options = new BitmapFactory.Options();
    options.inJustDecodeBounds = true;
    BitmapFactory.decodeResource(res, resId, options);

    // Calculate inSampleSize
    options.inSampleSize = calculateInSampleSize(options, reqWidth, reqHeight);

    // Decode bitmap with inSampleSize set
    options.inJustDecodeBounds = false;
    return BitmapFactory.decodeResource(res, resId, options);
}

This method makes it easy to load a bitmap of arbitrarily large size into an ImageView that displays a 100×100 pixel thumbnail, as shown in the following example code:

mImageView.setImageBitmap(
    decodeSampledBitmapFromResource(getResources(), R.id.myimage, 100, 100));

You can follow a similar process to decode bitmaps from other sources, by substituting the appropriate BitmapFactory.decode* method as needed.

4

  • 24

    This answer is being discussed on meta

    – rene

    Sep 7, 2015 at 8:44

  • 10

    This answer (except the information reached through the link) do not offer much of a solution as for an answer. The important parts of the link should be merged into the question.

    Sep 7, 2015 at 10:02


  • 8

    This answer, like the question and the other answers are Community Wiki, so this is something the community can fix by editing, something that does not require moderator intervention.

    – Martijn Pieters

    Sep 8, 2015 at 18:44

  • Really helpful in 2022.. Trying to run an app on an old HTC One S. 31mb image in a memory stream is too much lol.

    Jun 22 at 4:57

381

I’ve made a small improvement to Fedor’s code. It basically does the same, but without the (in my opinion) ugly while loop and it always results in a power of two. Kudos to Fedor for making the original solution, I was stuck until I found his, and then I was able to make this one 🙂

 private Bitmap decodeFile(File f){
    Bitmap b = null;

        //Decode image size
    BitmapFactory.Options o = new BitmapFactory.Options();
    o.inJustDecodeBounds = true;

    FileInputStream fis = new FileInputStream(f);
    BitmapFactory.decodeStream(fis, null, o);
    fis.close();

    int scale = 1;
    if (o.outHeight > IMAGE_MAX_SIZE || o.outWidth > IMAGE_MAX_SIZE) {
        scale = (int)Math.pow(2, (int) Math.ceil(Math.log(IMAGE_MAX_SIZE / 
           (double) Math.max(o.outHeight, o.outWidth)) / Math.log(0.5)));
    }

    //Decode with inSampleSize
    BitmapFactory.Options o2 = new BitmapFactory.Options();
    o2.inSampleSize = scale;
    fis = new FileInputStream(f);
    b = BitmapFactory.decodeStream(fis, null, o2);
    fis.close();

    return b;
}

6

  • 42

    Yes you’re right while is not so beautiful. I just tried to make it clear to everyone. Thanks for your code.

    – Fedor

    Aug 24, 2010 at 1:32


  • 12

    @Thomas Vervest – There’s a big problem with that code. ^ doesn’t raise 2 to a power, it xors 2 with the result. You want Math.pow(2.0, …). Otherwise, this looks good.

    – DougW

    Oct 13, 2010 at 7:42

  • 7

    Ooh, that’s a very good one! My bad, I’ll correct it immediately, thanks for the reply!

    Oct 26, 2010 at 9:20

  • 9

    You are creating two new FileInputStreams, one for each call to the BitmapFactory.decodeStream(). Don’t you have to save a reference to each of them so that they can be closed in a finally block?

    – matsev

    Feb 15, 2011 at 8:21


  • 2

    @Babibu The documentation doesn’t state that the stream is closed for you, therefore I assume it should still be closed. An interesting, and related, discussion can be found here. Note the comment by Adrian Smith, which relates directly to our debate.

    May 12, 2013 at 21:32